By applying the Binder first, it binds the loose fibres back together, making a much stronger base for the filler to sit on. When leather becomes damaged, this fibre structure becomes weaker which may then lead to rips and tears. The fibre structure within the leather is what gives leather its strength. Why is the Leather Binder an important step in repairing damaged leather? Colour restoration will then need to take place in the damaged area.
Further applications may be required if the area still looks and feels fibrous in areas. A further two coats applied in the same way is normally required so that the damage can be sanded smooth.
Leave the Binder to dry this can be sped up with the use of a hairdryer. It should be applied with pressure to allow the product to soak into the fibre structure. The Leather Binder should be applied to the damaged area with a sponge or cotton bud. However deep cracks may be better repaired using Flexifil. Numerous coats can be applied in this way to achieve the desired fill level.ĭepending on the severity and depth of the cracks, they can be filled out with the Leather Binder alone. Applying the product in this gentle manor will allow it to build up in the damaged areas and start to fill out the cracks. Several more coats of Leather Binder should then be applied this time by gently wiping it over the cracks rather than applying pressure. You should always remove any dust caused from the sanding action with a damp cloth. At this stage, the surface can be sanded with wet and dry sandpaper, or for best results, an Abralon sanding pad to smooth out any raised or rough areas. You will notice as the Leather Binder soaks in, it will cause the absorbent areas to darken. It is important to use pressure when applying the Leather Binder for the first four coats, this will ensure that the product soaks deep into the network of fibres and hold them tight together which will create a much stronger base for a long-lasting repair. Leave the Binder to dry this can be sped up with the use of a hairdryer.Īpply a further three coats in the same way. The Leather Binder should be applied to the affected areas with a sponge. By strengthening the fibres you can sand leather down that would otherwise have gotten worse as you sanded it. The Leather Binder also makes sanding worn leather possible.
By using the Leather Binder first, you guarantee yourself a much longer lasting repair. Not because the flexifil isn’t good enough, but because the leather beneath it is weak – it is the leather that might tear open, not the filler. For instance, if you just used the flexfil you would get a great repair but it might not last. It gives you the confidence that when you make a repair you know it will last. This stronger structure greatly improves the tensile strength of the leather, which makes repairing leather easier and gives longer lasting results. The Binder soaks deep into the leather fibres holding them tightly together creating a stronger leather structure. It can also be used on small imperfections in the leather such as scuffs and scratches, allowing the leather to be sanded smooth. Leather Binder is a thin liquid filler that can be used to strengthen the weakened fibre structure of leather that is heavily worn or cracked.
0 kommentar(er)
